ABS undermount FRONT SPLITTER&2 SUPPORT RODS- 2014-2019 C7 Corettes Z06 & GS

Description

Accent your ride with this track tested, race inspired, brand new SBS PERFORMANCE Parts LLC's Front splitter for 2014-2019 C7 Corvettes Z51 Stingrays, Grand Sports and Z06s. (requires factory plastic or carbon fiber equipped C7s aero 2 or aero 3 packages).  This splitter is made from 1/4" Black ABS automotive plastic which is strong, yet flexible.  Great way to add aero down force to your Vette's front end and also to protect your factory front splitter from steep drive ways, curbs and speed bumps.
Bolts directly to your C7 front factory splitter .
Comes with:
1- 1/4" ABS black splitter 76" x 24".
21- #6x1" phillip flat head machine screws
21-1-1/4" x 3/16" fender washers
4- 6M-1.0 x 45 mm phillip flat head machine screws
2- 10" generic SUPPORT RODS (SHIPPED SEPERATELY)
NOTE: some drilling of bumper, through the splitter is required. tools required: Jack, jack stands,10mm wrench/socket, phillips screw driver, & T22 torx bit & Locktite thread lock.
This splitter is designed to create down force on the front of your car. The higher the speeds, the more downforce is created. DO NOT USE THIS Splitter if you are driving over 75 mph without installing at least 2 spoiler support (adjuster) rods! Returns are accepted only if splitter has not been installed, unless there is a fitment issue or the incorrect splitter was purchased-based on year or model mustang.
Note: We design and manufacture splitters. These splitters are made to order.  Buyer may request modifications to the SBS Performance Parts LLC's design. The grainy side of the automotive ABS is the top/upper side of the splitter. The smoother side of the splitter is the bottom. The grainy side is extremely durable. Theses splitters are almost impossible to break which makes it so ideal for this applications. Please note that bottom smoother side may come with lines from manufacturer and the bottom side is very easily scratched, even a soft microfiber cloth can scratch because it is raw, unfinished ABS plastic. Some buyers have opted to have the bottom side painted and have installed the splitters upside down, allowing the painted side to be installed up.